Mann Oil Separator

The air compressed from the head of the compressor mains is filled with oil droplets of different sizes. Large oil droplets are easily separated by the oil and gas separation tank, while small oil droplets (suspended) must pass through the micron-sized glass fiber filter of the oil separation filter. The material is filtered.

Send InquiryChat Now
Product Details

Oil Separator For Mann Product Introduction:

The air compressed from the head of the compressor mains is filled with oil droplets of different sizes. Large oil droplets are easily separated by the oil and gas separation tank, while small oil droplets (suspended) must pass through the micron-sized glass fiber filter of the oil separation filter. The material is filtered. The correct choice of glass fiber diameter and thickness is an important factor to ensure the filtration effect. After the oil mist is intercepted, diffused and polymerized by the filter material, the small oil droplets are quickly polymerized into large oil droplets, which pass through the filter layer under the action of aerodynamic force and gravity, and settle at the bottom of the filter element. These oils are returned to the lubrication system through the inlet of the return line at the bottom of the filter element, allowing the compressor to discharge relatively pure, high-quality compressed air.

1.jpg

Oil Separator For Mann Product Characteristics:

1. The filtration accuracy is 0.1 μm.

2. The oil content of compressed air can reach below 3ppm.

3. The filtration efficiency is 99.99%.

4, the service life can reach 3500-5200h.

5. Initial pressure difference: ≤0.02MPa.

6. The filter material is made of American HV (Binzer) company and American Lydall company glass fiber.

2.jpg

Oil Separator For Mann Product Application:

1. In construction machinery, hydraulic transmissions such as excavators, tire loaders, truck cranes, crawler bulldozers, tire cranes, self-propelled scrapers, graders and vibratory rollers are commonly used.

2. In agricultural machinery, hydraulic technology is also widely used, such as combine harvesters, tractors and plows.

3.jpg

Oil Separator For Mann Quality Assurance:

1.Mann brand also takes into account different conditions of use (such as extremely cold and extremely hot) in the selection of materials, using imported hot melt adhesive to ensure the most reliable performance under any possible conditions - 100%, sealed .Strict tolerances.

2.The installation dimensions of the MANN filter are performed in a production process that exceeds the tolerances of the mainframe design to ensure a matching and secure seal between the filter cartridge and the housing.

3.Mann brand filter uses a high-performance adhesive bonding process at the filter paper seams of some ring filters to ensure direct flow of non-clean air

 


Hot Tags: Mann Oil Separator, suppliers, manufacturers, factory, price
Inquiry