Basket Filter Housing

Basket Filter Housing is mainly composed of a nozzle, a main pipe, a filter basket, a flange, a flange cover and a fastener. When the liquid enters the basket through the main tube, the solid foreign particles are blocked in the filter basket, and the clean fluid passes through the filter basket and is discharged from the filter outlet. When cleaning is required, unscrew the screw plug at the bottom of the main pipe, drain the fluid, remove the flange cover, and refill it after cleaning. Therefore, it is extremely convenient to use and maintain.

Send InquiryChat Now
Product Details

Basket Filter Housing Product Introduction:

Basket Filter Housing is mainly composed of a nozzle, a main pipe, a filter basket, a flange, a flange cover and a fastener. When the liquid enters the basket through the main tube, the solid foreign particles are blocked in the filter basket, and the clean fluid passes through the filter basket and is discharged from the filter outlet. When cleaning is required, unscrew the screw plug at the bottom of the main pipe, drain the fluid, remove the flange cover, and refill it after cleaning. Therefore, it is extremely convenient to use and maintain.

1.jpg

Basket Filter Housing Product Application:

1. Weakly corrosive materials in chemical and petrochemical production, such as: water, oil, ammonia, hydrocarbons, etc.

2. Corrosive materials in chemical production, such as: caustic soda, soda ash, concentrated sulfuric acid, carbonic acid, aldehyde acid, etc.

3. Low temperature materials in refrigeration, such as liquid methane, liquid ammonia, liquid oxygen and various refrigerants.

4. Materials that have hygienic requirements in food and pharmaceutical production, such as: beer, beverages, dairy products, syrup, etc.

2.jpg

Basket Filter Housing Selection Principle:

Basket filter for pipes Manufacturing standard JB/7538

1. Import and export routes

In principle, the inlet and outlet diameter of the filter should not be less than the inlet diameter of the matching pump, which is generally consistent with the inlet pipe diameter.

2, the nominal pressure

The pressure rating of the filter is determined by the highest pressure that may occur in the filter line.

3, the choice of the number of holes

The main consideration is the particle size of the impurities to be intercepted, depending on the process requirements of the media process. The size of the screen that can be intercepted by various specifications of the screen can be found in the table below.

4, filter material:

The material of the filter is generally selected to be the same as the material of the connected process pipe. For different service conditions, filters of cast iron, carbon steel, low alloy steel or stainless steel may be considered.

5, filter resistance loss calculation

Water filter, the pressure loss is 0.52~1.2kpa at the general rated flow rate

3.jpg

Basket Filter Housing Maintenance:

1. The core part of the filter is the filter core piece. The filter core is composed of a filter frame and a stainless steel wire mesh. The stainless steel wire mesh is a wearing part and needs special protection.

2. When the filter works for a period of time, certain impurities are precipitated in the filter core. At this time, the pressure drop increases, the flow rate will decrease, and the impurities in the filter core need to be removed in time;

3. When cleaning impurities, pay special attention to the stainless steel wire mesh on the filter core can not be deformed or damaged. Otherwise, the filter will be installed again. The purity of the filter will not meet the design requirements, and the compressor, pump, instrument and other equipment will be damaged. To destruction

4. If the stainless steel wire mesh is found to be deformed or damaged, it needs to be replaced immediately.

 


Hot Tags: basket filter housing, suppliers, manufacturers, factory, price
Inquiry