Hydraulic Oil Purifier Filter Cart

Hydraulic Oil Purifier Filter Cart is a mechanical device that filters solid impurities and moisture in oil and improves oil quality. Filtration of solid impurities and moisture in the impure oil is removed by pressure filtration or vacuum evaporation-pressure filtration. The oil filter truck is mainly used to improve the insulation performance of the oil for electric appliances and the purity of the lubricating oil.

Send InquiryChat Now
Product Details

Hydraulic Oil Purifier Filter Cart Product Introduction:

Hydraulic Oil Purifier Filter Cart is a mechanical device that filters solid impurities and moisture in oil and improves oil quality. Filtration of solid impurities and moisture in the impure oil is removed by pressure filtration or vacuum evaporation-pressure filtration. The oil filter truck is mainly used to improve the insulation performance of the oil for electric appliances and the purity of the lubricating oil.

1.jpg

Hydraulic Oil Purifier Filter Cart Product Characteristics:

Medium: general hydraulic oil, water-glycol, phosphate ester hydraulic oil

Rated flow rate L/min: 6 10 16

Original pressure loss MPa: ≤0.02

Rough filtration accuracy: 40 mesh

Fine filtration precision μm: 3, 5, 10, 20, 40

Motor power kw: 0.18 0.25 0.35

Voltage V: AC 380V three-phase, AC220V two-phase

Weight kg: 13 16 18

Dimensions mm: 650X680X980 720X680X1020

2.jpg

Hydraulic Oil Purifier Filter Cart Product Categories:

First, the oil filter truck can be divided into two-stage filtration and three-stage filtration oil filter trucks, and can be added with a primary filtration system on the basis of the original secondary filtration according to the needs of customers, thereby achieving high-precision filtration effect.

Second, the emerging molecular oil purifier also uses electrostatic separation and resin adsorption technology to remove metamorphic oil molecules, so that the insulating oil is highly purified and the insulation performance is improved.

3.jpg

Pall Filter UE319AT20H Operation Method:

(1) Place the machine on a relatively flat floor or in a car box, and carefully check whether the whole machine is loose or not. Pay special attention to the connection between the motor and the oil pump must be tight and concentric.

(2) Connect the power supply correctly and start the oil pump to check whether the rotation direction is correct. Otherwise, change the power phase sequence.

(3) After the power is turned on, check whether the temperature controller is in a normal state and set the required operating temperature.

(4) Connect the oil inlet and outlet pipes and tighten them to remind the user that the oil outlet pipe and the oil outlet must be tightened. Otherwise, as the pressure increases, the oil discharge pipe will be washed away, adding unnecessary trouble.

(5) After the oil pipe is fixed in and out, the motor button is activated, and the oil pump starts to work normally. When the oil outlet flows out, the rotary heating switch activates the heater, and the oil after the third-stage filtration is the purified oil. During the filtration process, please observe the pressure gauge. If the pressure reaches 0.4MPA, please clean and replace the filter cartridge in time.

(6) When one barrel of oil is pumped out and need to pump another barrel of oil, it needs to move quickly to avoid the oil pump idling for a long time. If it is too late, it will stop, and then restart after the oil pipe is connected.

 


Hot Tags: hydraulic oil purifier filter cart, suppliers, manufacturers, factory, price
Inquiry