High Flow Water Filter Element for 3M

3M High Flow Water Filter Element has large size, large flow processing capacity, special imported filter material for special characteristics, and fluid flow from inside to outside, effectively trapping impurities, suitable for various standard large flow filters.

Send InquiryChat Now
Product Details

High Flow Water Filter Element For 3M Product Introduction:

3M High Flow Water Filter Element has large size, large flow processing capacity, special imported filter material for special characteristics, and fluid flow from inside to outside, effectively trapping impurities, suitable for various standard large flow filters.

1.jpg

High Flow Water Filter Element For 3M Product Characteristics:

1.30 inch polytetrafluoroethylene (PTFE) membrane water filter membrane has extra strong hydrophobicity, ensuring sterilization in wet or dry conditions.

2. High temperature resistance, impact resistance, corrosion resistance

3. The initial differential pressure is low, the gas flux is hit, and the service life is long.

4. Available in 508mm, 1016mm, 1524mm length filter

5. The flow direction from inside to outside ensures that all impurities are trapped inside the filter element

2.jpg

High Flow Water Filter Element For 3M Product Application:

1. Filtration of water in the biopharmaceutical industry

2. Paint Coatings Petrochemicals

3. Microelectronics Film Fiber Resin

3.jpg

High Flow Water Filter Element For 3M Replacement Method:

Replacement method of the front three-stage filter:

There is usually water overflow during this process. Please prepare a cleaning device such as a basin or towel:

a) turn off the plating ball valve and pressure barrel ball valve;

b) Open the gooseneck faucet to remove residual water from the pipeline;

c) After the water is no longer flowing out, use a filter shell wrench to open the filter housing with the filter element;

d) remove the old high-flow filter element and load a new filter element of the same specification;

e) Apply a lubricant to the black “O” ring above the filter housing and place the “O” ring into the groove in the filter housing.

f) In a vertical manner, tighten the filter housing to avoid shifting the “O” ring.

g) Open the plating ball valve and pressure barrel ball valve.

 


Hot Tags: high flow water filter element for 3M, suppliers, manufacturers, factory, price
Inquiry